View Cart “#GLZ-032 – 1 Qt. GlazeKote Sealer” has been added to your cart.
Quart-of-Sealer

#SSW-032 – 1 Qt. Super Sealer Wax

$19.90

Super Sealer Wax is a water- based acrylic and wax co-polymer which forms a tough abrasion resistant, clear, non-yellowing, top coat polish to protect existing sealers and finishes on concrete, concrete tile, terra cotta, and stone.

SKU: SSW-032 Category:

Product Description

PRODUCT DESCRIPTION: Super Sealer Wax is a water- based acrylic and wax co-polymer which forms a tough abrasion resistant, clear, non-yellowing, top coat polish to protect existing sealers and finishes on concrete, concrete tile, terra cotta, and stone. This co-polymer offers excellent gloss and can be stripped with conventional wax polish removers. Its toughness protects the existing finish and acts as a sacrificial coating for the hard sealed substrate. Super Sealer Wax resists scuffs and mars while enhancing the gloss of the finish below. Super Sealer Wax also increases slip resistance. It is designed to be applied on top of existing acrylic, polyurethane, and epoxy sealers. It is used on newly sealed floors and restores shine to previously sealed concrete floors.

RECOMMENDED USES: Super Sealer Wax polishes interior concrete tile and floors. It enhances decorative systems including stained concrete floors on both newly sealed floors and to regain the luster to worn areas of previously sealed and polished floors. Super Sealer Wax may be used in restaurants, stores, malls, office buildings, health care facilities, hotels, motels, etc… and of course, in homes. May be “spot” applied to worn areas.

PREPARATION: Floor should be clean and sealed.

APPLICATION: To be used over a properly and completely sealed surface as a finishing coat. Apply with lambs wool applicator, sponge, mop or airless sprayer. Two to three coats may be preferred. Allow 30 – 60 minutes between coats to dry. Though not necessary, buffing with high speed buffing machine will maximize luster of Super Sealer Wax. Allow a minimum of 4 hours to cure and dry before foot traffic resumes.

COVERAGE: 1000 square foot per gallon per coat. 2–3 coats may be preferred.

CLEAN UP: Clean up with water immediately after use.

DISCLAIMER: Manufacturer warrants the product to be free from defects and will replace or refund the purchase price of said products proven defective. Since the manufacturer has no control over handling, use or storage, no guarantee expressed or implied is offered. The suitability of the product for any use shall be solely up to the user. Manufacturer retains right to legal venue.

Thank you for your consideration of our products.