Quart-of-Sealer

#MTS-032 – 1 Qt. MatteKote Sealer

$22.49

Olde World MatteKote Sealer is a one-part modified acrylic polymer sealer that top coats and protects cementitious tiles, stone, and concrete. Olde World MatteKote Sealer seals out and beads water. Interior or Exterior, non-yellowing formula dust-proofs

SKU: MTS-032 Category:

Product Description

PRODUCT DESCRIPTION: Olde World MatteKote Sealer is a one-part modified acrylic polymer sealer that top coats and protects cementitious tiles, stone, and concrete. Olde World MatteKote Sealer seals out and beads water. Interior or Exterior, non-yellowing formula dust-proofs, helps protect from the sun, and offers a clear satin sheen. It helps protect and prolong the color and appearance of the substrate from oil, salt, sunlight, etc. This easy to apply, water-based, environmentally friendly formula cleans up with water. Do not apply if rain is imminent. Top coating with Super-Sealer Wax is recommended on interior applications to extend the life and luster of the surface being applied to.

APPLICATION: One two-application coat of Olde World MatteKote Sealer should be applied to tile or stone upon removal from mold, if it is to be used as an aid to curing. It may be applied to a damp or dry surface at temperatures about 50 degrees F. Apply with a sponge, “floating” the surface with the sealer. Apply in one direction, then within five minutes in the other direction. (North-South, then East-West). Saturate, but do not allow it to puddle on the surface. If the surface rejects the second coating, you waited too long to apply it. It will bead up at that point. Drying time for MatteKote is 3 hours for foot traffic, 24 hours for automobile traffic.

COVERAGE: Approximately 200-400 square feet per gallon depending on porosity of substrate.

CLEANUP: Cleanup with water. Warm water works best.

PRECAUTIONS: Always test a small area for compatibility before proceeding. If a white film forms, wash away with water. If it persists, scrub with brush and water. White film is usually due to over-application and product puddling. Protect product from freezing. Store above 40 degrees F.

SAFETY MEASURES: Use gloves and protective glasses when handling. Use with adequate ventilation. Avoid direct contact. Non-flammable, water-based, environmentally friendly.

DISCLAIMER: Manufacturer warrants product to be free from defects and will replace it or refund the purchase price of said products proven defective. In that the manufacturer and Olde World Enterprises, Inc. has no control over handling, use or storage; no guarantee expressed or implied is offered. The suitability of the product for any use shall be solely up to the user. Manufacturer retains right to legal venue. For Professional Use Only.

Thank you for your consideration of our products.